New addition to vortex flowmeter family: OPTISWIRL 2100 for ...

2022-07-02 04:00:49 By : Ms. Holly Huang

Economical solution for liquid, (wet) gases, saturated and superheated steam applications Advanced Vortex Frequency Detection (AVFD) technology for stable measurements with demanding process conditions from -40…+240°C / -40…+464°F Flange and sandwich versions with optional integrated nominal diameter reduction Remote option with converter installation up to 50 m / 164 ft from sensor

As an addition to the OPTISWIRL family, KROHNE introduces the OPTISWIRL 2100. The new vortex flowmeter aims at basic utility applications in the process industries and is an economical solution for the measurement of liquids, (wet) gases, saturated and superheated steam where high accuracy is not required.

OPTISWIRL 2100 features the robust vortex technology of the OPTISWIRL product series and is also equipped with the Advanced Vortex Frequency Detection (AVFD) technology for signal filtering: it provides stable measurements even under demanding process conditions with medium temperatures from -40…+240°C / -40…+464°F, thus making it one of the most cost-effective vortex flowmeters in the market.

The 2-wire 4…20 mA / HART 7 device is available as flanged version DN15…300 / ½…12' or sandwich (wafer) version DN15…DN100 / ½…4'. For a large measurement span even in pipelines with large diameters, a version with integrated nominal diameter reduction is available. For convenient on-site parametrisation and measurement reading, a remote option allows to install the signal converter up to 50 m / 164 ft away from the sensor. Approvals for use in hazardous areas are in preparation.

The new device adds to the OPTISWIRL vortex series as an economical alternative to the OPTISWIRL 4200. Advanced features such as pressure and temperature compensation, SIL 2/3 certification, heat quantity calculation, and fieldbus communications are only available with OPTISWIRL 4200.

ENVEA presents a new continuous Indoor Air Quality Monitor sensor for Dust Exposure

The AirSafe PM is a new measuring instrument to monitor particulate matter exposure such as PM1, PM2.5, PM4.25, PM10 and TSP in indoor ambient air. The AirSafe PM is used to monitor safety levels of air quality for personnel as well as to optimize process and dust control systems. The measured data can also be used by health and safety departments to be proactive in reducing PM concentration and exposure. Using a high-end optical system, the AirSafe PM monitors the air flowing through the device, counting...

Vegetable Oil Hydrogenation Process Relies On H2 Gas Measurement With Thermal Flow Meter

Process and plant engineers in the food/beverage industries who are responsible for vegetable oil hydrogenation processes will find the precision ST80L Series Thermal Mass Flow Meter from Fluid Components International (FCI) provides accurate H2 gas mass flow measurement that helps them deliver a tasty product. In hydrogenation, H2 gas is added to oil from soybeans, sunflowers, palms, olives and other fruit/vegetable sources to make them more solid or spreadable, as in the case of butter substitutes. The oils...

Thermal Mass Flow Meter Helps Reduce Cost of Plastics Recycling Technology

Engineers responsible for the complex process of recycling used plastic discarded as garbage and then given new life will find the rugged, direct mass flow measuring ST Series Thermal Flow Meters from Fluid Components International (FCI) helps them more accurately measure synthetic gas for economical co-gen plant operation. According to environmental experts, there is a crisis in finding viable solutions to the recycling of the growing quantity of used plastics. A new process, known as thermal anaerobic technology...

Thermal Mass Flow Meters Excel in Hydrogen (H2) Measurement

Engineers and plant operators responsible for producing, using, dispensing, or distributing hydrogen (H2) gas will find accurate and rugged flow meter solutions in the ST Series Thermal Flow Meters from Fluid Components International (FCI). These precision H2 calibrated flow meters provide a range of products for any pipe diameter and virtually any installation conditions and require no routine maintenance. Hydrogen is again a focus of global attention as a renewable energy fuel resource. Production processes...

T,C&A Lab Upgrades Thermal Insulation Materials Testing

For T,C&A Lab, Alfa Chemistry’s testing branch, the mission to help customers solve their varied testing needs remains unchanged no matter how things might get different. Very recently the lab announces to have completed upgrading of its thermal insulation materials testing service, which is purposed to deliver valuable insight into varieties of thermal insulation materials such as fiber, foam, expanded or extruded polystyrene. Considering the common use in many fields, especially in large-scale engineeri...

No comments were found for New addition to vortex flowmeter family: OPTISWIRL 2100 for basic utility applications. Be the first to comment!

Environmental XPRT is a global environmental industry marketplace and information resource. Online product catalogs, news, articles, events, publications & more.

Environmental XPRT is part of XPRT Media All Rights Reserved. Terms Privacy

Our sites: Agriculture XPRT Energy XPRT Medical XPRT XPRT